Sd Card Storage Ptz Camera,1080P Driving Recorder,Industry Outdoor Camera,Vision Wireless Camera Shenzhen Zuomi Technology Co., Ltd. , https://www.bkvis.com Gem Biogas Fermentation (Mast Fermentation is Best for Fermentation Aids)
In the biogas production process, poor management can lead to various issues like slow gas output, low yield, or crust formation on the surface. To overcome these challenges, using biogas fermentation aids like Gembio can significantly improve gas production efficiency. It's a simple and user-friendly solution that plays a crucial role in optimizing the anaerobic digestion process.
The Gumbol Biogas Fermentation Aid is specially formulated with essential nutrients and trace elements that support the growth and activity of methanogens—key microorganisms responsible for methane production. These trace elements help stimulate the methanogens, encouraging faster reproduction. At the same time, the product enhances enzyme activity, speeding up the breakdown of complex organic materials such as cellulose. This not only accelerates the digestion process but also ensures that bacteria have the necessary nutrients to thrive.
Additionally, the aid includes an adsorbent material that increases the contact area between the microbes and the organic matter. This helps raise the temperature around the methanogens, further boosting their activity and leading to quicker gas generation.
For optimal results, the recommended dosage is 200–250 grams per cubic meter of digester volume. For example, a 4-cubic-meter tank would require about 2 bags, a 6-cubic-meter tank needs 3 bags, and so on. When using a new digester, mix the fermentation aid thoroughly with the raw materials before adding them to the pool. For an existing system, it’s best to flush the aid into the inlet after removing some slurry from the outlet. Repeat this process several times to ensure even distribution.
Using Gumbol Biogas Fermentation Aid can cut the startup time by over 50% in new digesters and dramatically boost gas output in older systems. Normally, gas production should increase quickly after adding the aid. If no improvement is noticed within a week, check if the mixture is evenly distributed. If not, try re-introducing the aid through the feed inlet and mixing it well with the slurry. Also, make sure there are no leaks in the system. For more details, visit the official website or contact customer support.