The process of the sealing machine is actually very simple. As long as the essence of the product is found, it can make a difference. Not only is there any interest, but the important thing is that it will be popular in the market for a long time. This will be the vacuum sealing machine. The future development will be of great help, and consumers' awareness will be matured at this time. The familiarity of the filling and sealing machine will be taken seriously from this time. How to operate the vacuum sealer: The first step is to turn on the power, then turn the power selection switch as needed, the power indicator light is on. The power selection switch points to the vacuum is the vacuum seal, and the vacuum inflation is the vacuum inflation seal. The second step is to place the plastic bag containing the item in the vacuum chamber. The bag mouth is neatly placed on the heat seal. The third step is to press down the cover, and the panel is pumped until the indicator light is on. The vacuum pump starts to pump, the cover is automatically sucked, and the vacuum knob can adjust the degree of vacuum according to the packaging requirements. When adjusting, the scale is from low to high. The idea is small. The fourth step is when the pumping reaches the set time (ie the required degree of vacuum), that is, the end of the pumping, the pumping indicator is extinguished, and the charging indicator is illuminated to indicate the start of the inflating. The inflating knob can adjust the length of the inflating time ( That is, the amount of inflation is the same as above. If the method does not need to be inflated, turn the power switch to the vacuum position, the program will automatically enter the vacuum packaging, and the inflation indicator will go out. The fifth step is when the air pumping or inflation is completed, the indicator light is extinguished, and the heat seal indicator light is on, that is, the sealing program is entered, and the heat sealing time and the temperature adjustment knob are arranged on the panel to adapt to different thick materials and adjust the time and temperature. The rotation amplitude should be small to prevent the heat sealing temperature from suddenly increasing and burn out the heat sealing accessories. The sixth step is that when the set heat sealing time is reached, the heat sealing indicator is extinguished, so that the heat sealing is finished, that is, the vacuum chamber enters the atmosphere through the electromagnetic valve until the cover is automatically lifted, and the vacuum inflation packaging process is completed, ready to proceed. Next packaging cycle.