LC high viscosity Roots pump, sub-belt drive and gear reducer drive. LC Roots pump is suitable for conveying crude oil, petroleum, syrup, yeast light alkaline liquid with temperature not higher than 140 ° C. This pump has: low The number of revolutions, high efficiency, small volume, large flow, low power consumption, strong self-priming ability, no oil, easy to use, etc. The structure is reasonable and easy to use. The Roots oil pump can be widely used to transport petroleum and petroleum products (gasoline). Replacable copper pump blades) and factories to transport a variety of oils and liquids, such as crude oil, paint, diesel, heavy oil, lubricating oil, glass glue, oleic acid, toothpaste and light alkaline (soap processing) liquid; food processing can be transported Various liquids, such as soy milk, yeast, syrup, etc. Loading and unloading various tank trucks and tankers, etc., is fast, efficient, easy to use, and can be reversed.
Notes on the correct installation of the Roots pump 1. The installation height of the Roots pump should be such that it does not exceed the vacuum height allowed when the pump is working.
2. The pipeline should have a pipe rack, and the pump is not allowed to bear the load of the pipeline. 3. A vacuum gauge and a pressure gauge should be installed at the inlet and outlet of the pump to observe the working condition of the pump in time. 4. In order to make the pump and the motor work safely, The overload protection device should be installed in the electrical system. 5. The pipe elbow should be reduced as much as possible, and the larger the elbow radius, the better, so as not to cause vibration. 6. A filter device should be installed on the inlet line of the Roots pump to prevent large particles from entering the pump. Cavity, damaged oil pump