The powerful crusher is divided into a claw knife type crusher and a knife type crusher. The plastic crusher is suitable for a wide range of applications, and can be used for crushing and recycling various materials and shapes of plastic products. The processing technology is mature, and the important parts such as the box and the tool holder are processed integrally to ensure the matching precision; the structure is reasonable, the operation is convenient, and the power is durable. Practical and economical; there are a number of safety protection devices to ensure safe operation; double-layer setting of the feeding door bucket to reduce noise. First, let's talk about the installation precautions for the shredder: 1. Installation test: 1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts. 2. When installing, pay attention to the vertical direction of the main body and the horizontal. 3. After installation, check whether the bolts in all parts are loose and the main door is tight. If necessary, tighten them. 4. Configure the power cord and control switch according to the power of the device. 5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally. 1. The plastic pulverizer and power unit should be installed firmly. If the plastic crusher is required to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher is required to flow, the unit should be installed on the base made of angle iron and ensure the power machine (diesel or electric motor) and plastic. The pulley groove of the crusher is in the same plane of rotation. 2. After the plastic pulverizer is installed, check the fastening condition of each fastener. If it is loose, it should be tightened. Also check that the belt tightness is appropriate. 3. Before starting the plastic pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are flexible and reliable. Whether there is collision in the crushing chamber, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, the power machine and Whether the plastic crusher is well lubricated. 4. Do not change the pulleys casually, in case the rotation speed is too high, causing the explosion chamber to explode, or the rotation speed is too low, which affects the working efficiency of the crusher. 5. After the plastic pulverizer is started, it should be kept idling for 2~3min. After no abnormal phenomenon, it can be fed again. 6. Attention should be paid to the operation of the plastic shredder at work. First, the feeding should be uniform to prevent the crushing of the crushing chamber; secondly, do not overload the work for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out. Maintenance of the machine is an extremely important and regular task. It should be closely coordinated with extreme operations and maintenance. There should be full-time personnel on duty. In summary, the use, maintenance and maintenance of plastic shredders should pay attention to the following points: 1. It should be checked whether the parts of the machine are lost during transportation and whether the bolts are loose.
In fact, let's take a look at the precautions for the operation of the plastic shredder:
2. Turn the spindle pulley to check if there is any collision during rotation.
3. Check if the direction of rotation is correct after wiring the motor.
4. It is strictly forbidden to incorporate iron and debris in the pulverized materials.
5. If abnormal sounds are found, stop immediately.
6. Regularly check the lubrication phenomenon inside the bearing and inject the lubricating oil.