According to the main structure and configuration components of the vacuum packaging machine, a high-quality vacuum packaging machine must have the following basic conditions: 1. Select high-quality vacuum pump, the vacuum pump must be able to guarantee a good brand or products produced by the old industry. 2, electrical components must be selected to regulate the products of low-voltage electrical manufacturing enterprises to ensure safety, reliability, durability, because the electrical control part is the brain of the packaging machine. The composition of the whole machine control circuit must ensure the convenience of maintenance and the versatility and standardization of spare parts. It is strictly forbidden to use the old series and old type of electrical switches and other components that have been explicitly eliminated by the Ministry of Electrical and Mechanical Services. The cost, but it adds trouble to the user. 3. The steel structure of the whole machine must meet the frequent use requirements from material to thickness. In particular, the structure and materials of the vacuum chamber body must meet the requirements of food grade hygiene and standard thickness and strength. 4. The design of the whole machine should be reasonable and beautiful, and meet the professional standardization requirements of mechanical and electrical products or vacuum packaging machines. It has basic safety. All kinds of warning signs must be complete and marked in key positions. The nameplate must indicate the equipment. Number, date of manufacture, technical parameters, and implementation standards. 5. The standard currently implemented by vacuum packaging machine manufacturers is GB9177-88. The distinction between machine models is mainly determined according to the design sealing length of the machine (ie the length of the heating row), for example, 400mm long heating row (packaging machine) It is called the 400 type (usually called), and so on. The 500mm heating length packaging machine is the 500 type and so on. At present, the models that appear on the market usually include: 400, 500, 550, 600, 700, 680, 800, etc. Of course, there are many non-standard models that are subject to special user requirements, while in vacuum There should be other more important technical parameters in the packaging machine structure. These parameters are different from vacuum packaging machines of different manufacturers and brands (such as: double row spacing 350mm, sealing length 400mm called 400 type machine, and double row The spacing is 450mm, and the sealing length is 400mm, also known as the 400 type machine). Both single-chamber and dual-chamber models are modeled on the length of the seal. Therefore, we believe that when choosing a vacuum packaging machine, users should not simply select the model according to the model. Generally speaking, because the food (packaging) produced by each user is not the same, the packaging size is not the same, the technology of vacuum packaging Different grade requirements, different work efficiency requirements (production size, etc.), but should be based on the characteristics of the user's own products (including: liquid, solid, powder, gelatinous, semi-liquid; pickled products, meat cooked food, seafood, etc. ), the size of the bag (including: the width of the bag, the length of the bag, the height (thickness) after the item is installed to determine which model is suitable for the user.) The main basis for the user to determine the model is The sealing length of the packaging machine, the double row spacing, the maximum available height of the vacuum chamber, the production efficiency of the whole machine, and the like. 6, the same type of vacuum packaging machine products produced by different manufacturers in addition to the above mentioned aspects are not the same, the key is the main components of the level of high and low, the quality of the points. In general, the key factor in determining the manufacturing cost of a packaging machine is the quality of the internal components. The selection of high-grade, high-quality vacuum pumps and electrical components is the key to ensuring good machine performance and longevity. At the same time, choose a large pumping capacity (high Pumping rate) Vacuum pump is also an important factor to improve the machine grade, but the equipment cost is high. 7. Whether ordering equipment at the manufacturer or at the seller, the customer must understand the professional service ability and service attitude of the manufacturer or dealer, try to choose the manufacturers or merchants with excellent after-sales service conditions, and pay attention to the actual situation. After-sales commitment. 8. When purchasing equipment, technicians with certain electromechanical knowledge can observe the models you want and understand the equipment in many aspects. Beware of the simple selection of machines from the outside. Users of special specifications (non-standard) models must provide the following information to the manufacturer in order to allow the manufacturer to determine the structural form of the machine and the quotation of the equipment. 1. What kind of product (characteristics, shape) and packaging effect requirements are packaged; When the customer determines the price with the manufacturer, it must be clearly understood. The size and structure of the model determined by the manufacturer for the user, especially the selection of materials, materials and internal components, such as the model, size and brand of the vacuum pump, will be different. Affecting equipment cost and quality, the grades selected for other components may also affect the cost and reliability of this machine.
Sterilisation Pouch provide storage for sterile goods. Sterilisation Pouchs, like Sterilization bags and Sterilization foil, award a long shelf life for the sterile items and are equipped with a Coloured Indicator Tape that displays successful sterilization via a colour change. The sterilization foils are normally found on rolls and can be cut as need, which provides economic advantages. Bag sealers seal the instruments in packaging to prevent subsequent contamination. We also offer self-adhering sterilization bags in our assortment, so that the use of bag sealers or tape is unnecessary. All packaging is available in various sizes so that you can find the proper sterilization packaging to meet your requirements.
Sterilisation Pouch,Sterilization Pouches,Autoclave Pouches,Autoclave Bags NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com
2, the size of the package used [length × width (sealing length) × high (the height of the package after bagging)];
3. Requirements for the amount of packaging produced by the equipment team (production and packaging efficiency): how much (package/hour);
4. Requirements for the materials and structure of the equipment used in the environment.