Glass Venlo Greenhouse is Spire-type glass design, design and installation of windows when more convenient and easy. Its roof slope andle can be appropriately according to the local real climate change the environment. Glass Venlo Greenhouse Glass Venlo Greenhouse,Flowers Glass Greenhouse,Nursery Glass Greenhouse,Vegetables Glass Greenhouse JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , http://www.spgreenhouse.com
The electric heating plate is made of an electrothermal alloy wire as a heating material, and a mica soft plate is used as an insulating material, and a device for heating by a thin metal plate (aluminum plate, stainless steel plate, etc.) is outsourced. Typical applications are for example electric hot water bottles. The metal tubular electric heating element is cast in an aluminum plate, an aluminum plate or welded or mounted on an aluminum plate or an aluminum plate to form an electric heating plate of various shapes and electric heating. Typical applications include, for example, rice cookers, electric irons, electric coffee makers, and the like.
Precautions for installation and use of electric heating plate 1. The contact surface of the position where the electric heating element is installed should be flat without unevenness.
2. This heating element should be placed dry to avoid water immersion to affect its insulation properties.
3. When installing, check whether the installation position is consistent with the specifications of the heating element, and whether the voltage is consistent.
4. After installation, check the inner six-pin bolts, whether the terminal block bolts and the connecting bolts are locked, so as to avoid the thermal expansion and contraction affecting the life of the product.
5. It should be used under the specified voltage.
In Venlo Greenhouse, foundation is made of reinforced concrete and the side wall is made of brick or reinforced concrete plate. the steel frame always use hot dip galvanized light steel. Roof beam adopts horizontal girder structure and using herringbone connection. The horizontal girder bears 2 or more roofs, which is made of aluminum alloy. This material is used as roof structure material and also glass inlay material. Other beams using gutter style to minimize the section. Delighting material of the roof and side wall using 4 mm thick float glass.
Features and precautions for using hot plates
Introduction to electric hot plate :