IMS series automatic snowflake ice machine instruction manual implementation standard number: Q/320581FV D001-2007 First, the functional characteristics The company's IMS series automatic snowflake ice machine is a rectangular shape, patented products, beautiful appearance, with continuous ice making, fast ice making, large ice production and so on. From the process of water inflow, ice-making, ice-making, ice-breaking, ice-icing and ice-storing, a fully automatic computer-controlled continuous ice making is realized. If there is water shortage or ice in the refrigerator, the ice-making ice machine is operated on the operation panel. The corresponding indicator light will flash, and the ice crusher will automatically stop and have a good protection function. Since the storage refrigerator adopts a rigid foaming structure, the heat preservation performance is good, so that the crushed ice produced is not easily melted. Second, the instructions before use 1. The tilt angle of the box when transporting should not be greater than 45 0 , prohibiting inversion, so as not to cause failure of the compressor or refrigeration system. Third, the structure diagram 1. Rocker switch 2. Operation panel 3. Door body 4. Temperature probe 5. Ice spoon 6. Rear plate 7. Power cable 8. Inlet head 9. Drain connector 10 Drain head 11 Foot screw 12 Inlet pipe 13 Drainage pipe Fourth, use 1. Remove the outer packaging, and remove the attached file bag and inlet pipe, drain pipe, ice spoon, gasket and other accessories from the ice storage box. V. Daily maintenance 1. No matter whether the compressor is stopped for any reason (lack of water, excessive ice, power failure, etc.), it must not be started continuously. It should be restarted every Smin to avoid damage to the compressor. Sixth, technical parameters (measured under the condition of ring temperature 15 ° C, water temperature 10 ° C) model Ice making capacity Anti-shock protection type Input power (W) Refrigerant R134a Dimensions I 385 130 I 645 140 I 735 150 Seven, general faults and troubleshooting methods: (for users and maintenance personnel reference) 1. Water shortage Blockage or mechanical failure of the water inlet due to low ambient temperature Eight, electrical schematic
Ulcers is commonly known as gastric ulcer and duodenal ulcer, the formation of ulcers is closely related with gastric acid or pepsin digestion. Ulcer disease is a chronic disease, its seizures were cyclical, episodes and remission of alternating appear, and the onset of abdominal pain has a certain rule. The main cause of ulcers include: 1. Helicobacter pylori infection 2. Bad diet 3. Mental factors 4. Drug stimulation. Many patients with gastric ulcer who have taken non-steroidal anti-inflammatory drug history, these drugs will stimulate our gastric mucosa, causing damage, then it will cause ulcer disease over time. The current anti-ulcer drug is mainly focused on reducing gastric acid and enhance the protective effect of gastric mucosa. In recent years,the research and development of anti-ulcer drug progress is faster, effective drugs have been listed, sales are also rising.
Antiulcer Drugs,Anti-Ulcerative Agent,Treatment For Stomach Ulcers,Treating Stomach Ulcers,Stomach Ulcer Medicine Taizhou Volsen Chemical Co., Ltd. , https://www.volsenchem.com
Changshu Xueke Electric Appliance Co., Ltd. 
2. When the ice crusher is used for the first time, the crushed ice made in the first 5 minutes is the cleaning process of the piping system. The crushed ice is not suitable for consumption. After 5-8 minutes, the crushed ice can be eaten.
3. Do not place objects or water containers on the ice crusher.
4. Pay attention to leveling the foot when the ice crusher is in place. It should be parked for 12 hours after the first use.
5. The ice crusher cannot be used outdoors in the open air. Do not spray directly. Do not place it in a place that is wet or easily exposed to water.
6. Do not touch the live parts such as the power plug with wet hands.
7. The ice-making ice crusher should be placed on a plane that is far away from the heat source, surrounded by non-corrosive gas and well ventilated, and at least a space of more than 150mm is left around to ensure the free flow of the airflow.
8. The outlet of the drain pipe should be lower than the tank to facilitate drainage.
9. The rated capacity of the wire should be >=10A, the cross-sectional area of ​​the wire is >=0.75 mm 2 , and the wire can be single or multiple strands. A fuse with a rated current of 10A is required.
10 Do not damage the power cord. If you process, pull, or bundle the power cord, or place heavy objects on the power cord, once the outer sheath is damaged, the power cord may be damaged, resulting in electric shock or fire.
11. Power supply range: 187V-242V SOHz
12. In addition to professional repair personnel, no one should open the ice crusher for repairs.
13. It is absolutely forbidden to modify the machine without authorization.
14. Operating temperature range: Environment: 10 ° C - 35 ° C.
15. A separate three-hole socket must be used with a good grounding wire. 
2. Place the ice crusher in a ventilated place, keep a space of not less than 150mm with the wall, keep away from the heat source, and ensure that the machine is placed smoothly.
3. Attach a small 12 soft plastic bellows attached to the drain head 10 on the back of the machine, and the other port to the water tank (self-contained) or the sewer.
4. Connect one end of the supplied water inlet pipe to the faucet with 3/4" screw joint for the drinking water supply pipe. The water pressure of the water supply pipe is 1.5-3Kg/cm 2 , and the other end is connected with the back of the ice crusher. The water head threaded joints 8 are connected. Note that when connecting, a gasket (scheduled) is required at both ends of the inlet pipe.
5. Plug in the power plug and press the rocker switch on the operation panel. At this time, the running light on the operation panel is on, the ice crusher starts working, and the ice crusher makes ice from the water. The ice storage implements automatic continuous ice making. If the amount of ice in the storage refrigerator reaches a certain level, the ice full light on the operation panel will light up, and the ice making ice machine will automatically stop; when the external water supply pipe has water or water supply failure, the operation panel The water shortage light will be on and the machine will stop automatically.
2. Regularly check the inlet and outlet connections to handle small amounts of residual water that may leak.
3. When the ice crusher is not in use, drain the remaining water in the liner, dry the refrigerator inner liner with a clean cloth, and screw off the drain connector cover 9 behind the cabinet to drain the remaining water in the water tank. Then tighten the drain connector cover 9.
4. When the ambient temperature drops below 0 °C, there is the possibility of icing. Drainage must be carried out to release the water, otherwise the inlet pipe may be broken.
5. The drain pipe should be inspected one or two times a year to prevent blockage.
6. Unplug the ice crusher when it is cleaned, inspected, and used for more than one week. When plugging or unplugging the power plug, apply the handheld plug and do not pull the power cord.
Kg/24h
(g)
(mm) IMS-40 >=40 380 x 543 x 722 IMS-85 >=85 548 x 611 x 883 IMS-100 >=100 548 x 611 x 883 Fault phenomenon cause Method of exclusion Ice crusher does not work The power supply voltage is lower than the specified lower limit of 187V, and the power plug or socket is not in good contact.
Stop immediately, wait until the voltage returns to normal and then start Water shortage light on the operation panel 1. Water supply system is short of water
2. Tap water pressure is too low 1. Check the water supply system to ensure that it is properly supplied and restarted.
2. The water pressure should not be lower than 1 Kg/cm 2 The compressor does not work
2. Ice full
3. Compressor trip
(The case temperature is too high ) 1. Check the water supply system
2. Take out some crushed ice
3. Stop after 1 hour of shutdown
Compressor works but does not make ice
Refrigerant leakage
2. Refrigeration system blockage
3. Solenoid valve is always open
4. Condensing fan does not turn
1. Re-add refrigerant and then leak detection
2. Flushing system to replace the dry filter
3. Replace the solenoid valve
4. Check if the condenser fan is running
Fault light on the operation panel
Wait until the ring temperature rises above 10 °C to make ice or repair it by professional maintenance personnel. 