Comparison of Nest Tube Production Processes 1. The production of reed tubes begins by selecting suitable reeds for bee nesting. A saw is used to cut the reeds into 16-18 cm long tubes, with one end left open and the other sealed. The open end is then smoothed using a grinding wheel or heated on a red iron plate to eliminate any burrs. Afterward, the nozzle is dyed in four colors: red, green, yellow, and white. Following the selection, cutting, smoothing, and coloring steps, a reed tube is completed. However, this method is highly labor-intensive and leads to significant waste of resources. The thickness of the tubes is inconsistent, which can make them unsuitable for wall bees due to being too thick or too thin. Additionally, the inner walls are often rough, allowing bacteria to accumulate, which can harm both the bees and their eggs. 2. Paper nest tubes are made by layering kraft paper on the inside and newspaper on the outside, with a bamboo stick, glass rod, or metal rod serving as the core. The materials are rolled to create a tube with a 1.5 mm wall thickness, a 6.5 mm diameter, and a length of 16 cm. Both ends are ground to smooth them, and one end is colored in four different colors—red, green, yellow, and white. These colored tubes are then mixed and bundled into sets of 50. The other end is coated with glue or white latex and sealed with softer paper before being covered with a cardboard layer. This process is also time-consuming and complex. The outer wall lacks consistent hardness, making it prone to damage during use. Moreover, the tubes can easily get wet during rainy weather, reducing their effectiveness and nesting success rate. 3. Our company’s nest tubes are produced using advanced machinery, streamlining the entire process into a single step. The tubes come in a variety of scientifically chosen colors that appeal to wall bees. The nozzles are smooth, and the tubes measure between 16-18 cm in length. The inner diameter is just right, and the material is specially formulated to match the unique habits and sensitive sense of smell of wall bees, significantly increasing their nesting success. The walls are thick, durable, and slightly elastic, allowing the tubes to return to their original shape after the bees have been removed. They are odorless, free from bacteria and toxins, ensuring high breeding success rates for wall bees. Usage Comparison: 1. Reed Tubes: Before use, debris must be manually removed from the inner walls, and any bacteria inside cannot be fully cleaned. Once the bees mature, the tubes must be cut open to remove the eggs, rendering them unusable afterward. This process is not only time-consuming but also risky, as it can lead to cuts or injuries. 2. Paper Tubes: Similar to reed tubes, paper tubes require careful cutting to extract the eggs once the bees are mature. Due to their low structural integrity, there's a risk of damaging the eggs during removal. After use, they are typically discarded and cannot be reused. 3. Our Bee Tubes: Simply plug one end with mud before placing them in the desired location. There's no need to worry about moisture or bacterial contamination. When the bees mature, they can be gently pushed out by hand, and they will naturally pop out without damage. The tubes return to their original shape and can be reused for more than five years. This design saves time and effort while improving the nesting and breeding success of wall bees. The Entire Dried Alaska Pollack Dried Alaska Pollack Silk,Low Fat Dog Treats Fish,Goodsale Three Dried Alaska Pollack Sale yanbian zhenxiang foods , https://www.driedpollock.com