How does bergamot breed deciduous fruit and how to increase the yield of bergamot?

How does bergamot breed deciduous fruit and fruit how to increase the output of bergamot? The bergamot must be shot once every three seasons in spring, summer and autumn. Spring shoots, summer shoots should be cut off in time, in addition to retaining a small number of strong branches as the results of the coming year, the rest of the branches should also be cut, so as not to seize the nutrients needed to maintain the growth of the leaves. The bergamot should be moved indoors by the end of autumn, and more windows should be opened when indoors. The indoor temperature should be kept between 5-12 degrees Celsius, not too high or too low. When opening the window, do not let the cold wind blow in.

How does bergamot breed deciduous fruit? How to improve the yield of bergamot

For plants that are wintering indoors, control the watering in winter and keep the basin soil slightly moist. If you find that the potting soil is too dry, you can only water a small amount of water in a small amount. When changing the basin, apply fertilizer at the bottom of the basin. During the bud stage, spray the leaf surface with 0.2% potassium dihydrogen phosphate solution for 1-2 times, and apply the thin pancake fertilizer water every 10 days after fruit setting.

The bergamot is native to Asia, and has extensive cultivation in Zhejiang, Fujian, Sichuan, Guangdong, and Guizhou provinces. In particular, Zhejiang has also formed a series of special potted bergamot products in recent years. It prefers warm and humid climate, chills and drought, the optimum growth temperature is 22 ~ 24 ° C, and the winter requires room temperature not less than 5 ° C to safely winter. It thrives in a well-lit, well-ventilated environment;

It is required that the potting soil is moist and well drained. Avoid the sticky weight and the saline-alkali basin soil, preferably acid|raw sand; flowering 2 to 3 times a year, the fruit has the fruit of the fruit and the autumn fruit. In order to prevent the occurrence of deciduous fruit drop, the potted bergamot can be used in four aspects: light, water, fertilizer and temperature management.

(1) Illumination: more sunshine should be seen during the growing season. If the light on the balcony or in the yard is poor, it will affect the flowering and the result; in the midsummer, it can be properly shaded; after the Mid-Autumn Festival, the temperature is low and the growth is stagnant. Insufficient light has little effect on its growth; even if it is not exposed to sufficient light for a long time in winter, it will not cause leaves or affect the growth and development of the coming year.

(2) Moisture: family potted plants, usually keep the soil moist and semi-salt. When the summer temperature is high, water is poured once a day in the morning and afternoon, so that the potting soil is not dry. When the temperature is high and the temperature is high and the wind is strong, before 9:00 am and after 4 pm, water is sprayed to the leaves and around several times to reduce the ambient temperature and increase the humidity of the air to prevent the dry heat from causing the flowers to fall. During the rainy season, it is necessary to prevent water from accumulating in the basin. After each rainstorm, it is necessary to dump the accumulated water accumulated in the basin in time to avoid causing the rotten roots of the plants.

(3) Fertilizer: The bergamot blooms many times a year, requiring more fertilizer. In the flowering season, it is generally applied once every half month, and the fertilizer is stopped in the rainy day. After the plant is budded, the fertilization should be suspended until the young fruit grows to the little finger. When the size is basically stable, the fertilization is resumed, and the phosphorus-containing light fertilizer water is applied once every 7 to 10 days for 4 to 5 times. If yellow-green or brown spots appear on the leaves, it is the performance of potassium deficiency in the basin, which will lead to premature senescence or fruit drop. 0.2% potassium dihydrogen phosphate can be sprayed.

(4) Temperature: When it is wintering indoors, it should be hot when it is cold, otherwise it will cause leaves. When the temperature rises before and after the beginning of spring, pay attention to window ventilation to prevent it from sprouting in the room too early; if the room temperature reaches 15 °C or above, it can be cooled by spraying water on the ground and spraying water on the surface to prevent it from premature. germination. Under normal circumstances, in the south of the Jianghuai area, you can enter the room before the frost falls, and leave the house before and after the Qing Dynasty.

This article URL: How does bergamot cultivate deciduous fruit drop how to improve the yield of bergamot

Laser Distance Meter

Laser distance measure is a very convenient tool for various types of applications in industries, construction and house decoration. Laser distance meter is a very useful device which gives accurate measurement of distance, area and volume especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses, infrastructures, gardens, roads, and many other applications requiring accurate results for distance , area and volume measurement.

Trade your heavy tape measure for laser rangefinder, which let you simply take measurements with one hand. No matter your job, the laser rangefinder will help you measure much farther, with greater accuracy and in more situations, saving you money and time.

Specification:

Product Model:

JX40

Accuracy:

±1.5mm (0.06 inch)

Measuring Unit:

metre/inch/feet

Measuring Range:

0.03~40m (0.01 to 131 ft)

Measuring Time:

0.1~4 seconds

Laser Class:

Class II

Laser Type:

635nm, <1mW

Waterproof & Dustproof :

IP54

Auto Laser Off:

60 seconds

Automatic Power-off:

480 seconds(8 minutes)

Lighting:

white LED

Datum Option:

Can choose Front edge or end piece edge as datum

Battery Status:

Y

Signal Strength Display:

Y

LCD display:

2 inch large screen

Display illumination and multi-line display:

Max 2 displays

Data Memory:

Y (allow 20 values)

Backlight display:

Y

Continuous Measurement:

Y

Min/max Measurement:

Y

Addition/Subtraction(Distance/Area/Volume):

Y

Area/Volume/Pythagoras Measurement:

Y

Battery Type:

AAA alkaline battery(2*1.5v )

Weight:

about 80g

Dimensions(L*W*H):

4*2*11.5cm

Auto correction and error report technology:

Y

Operating Temperature:

0-40 ℃(32-104 ℉ )

Storage Temperature:

-20~60 ℃ (-4~140 ℉)

Laser Distance Meter,Laser Distance Measure,Laser Rangefinder,Laser Distance Gauge

Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com