Is the automatic production line of mineral water closed?

The automatic production line of mineral water is a closed assembly line. The container is also externally treated. After UVi sterilization and ozone sterilization, it is basically sterile, so it can be stored for a period of time, generally around 12 months. The automatic exhaust filling valve is opened and filled one by one. The filling time is set by the PLC, and the filling time can be corrected by using the panel multi-function button according to the level of the liquid level. After filling to the liquid level, the excess water is returned to the pure water tank through the automatic exhaust port. If problems are found, they will be manually manually turned to manual to prevent accidents. When the chain is not in the right position, manually push the shaft out, then push the chain to the normal position. In the work, the disinfectant should be replenished in time to prevent the pump from being Idle in the waterless state and burn out the seal.

When the transmission motor runs with an empty bottle and enters the positioning sensing area with the sensing piece on the chain, the positioning sensor switch sends a signal to stop the transmission motor, and at the same time, the flushing bottle water pump is started, and the corresponding flushing and disinfecting work is performed (the flushing time is controlled by the PLC). Program setting control), after the flushing is completed, the cleaned empty bottle is transported by the bottle washing mechanism, falls on the push bottle holder, pushes the bottle cylinder to work, pushes the empty bottle to the filling position, and aligns the filling nozzle with the water bottle The mouth is flushed with pure water, and the filling pump starts filling. On-line water quality monitoring and control of automatic production line of mineral water , real-time monitoring of water quality changes, safety of water quality, automatic electronic control procedures, optional touch screen operation, easy to use, personalized design to meet local water quality, to meet the needs in all aspects.