Corn thresher installation "five" note
1. Make sure the equipment is placed on a flat and stable surface, at least four feet away from any walls or obstacles. This helps reduce vibrations and ensures safe and efficient operation.
2. When using the motor as the power source, always check that the power cord is securely connected and properly grounded. A loose connection can lead to electrical issues, while an improperly grounded wire poses a serious safety risk.
3. Feed the corn cobs into the machine in a continuous and even manner. The feeding amount should be moderate—too little will reduce production efficiency, while too much can cause the machine to jam or overload, potentially damaging the motor and other internal components.
4. The moisture content of the threshed corn cobs should not exceed 20%. If the moisture level is too high, it may affect the overall performance of the machine and result in poor separation of the kernels from the cob.
5. Before shutting down the machine, make sure all the corn cobs have been fully processed and discharged. Never stop the machine under load, as this can cause unnecessary stress on the motor and mechanical parts, leading to long-term damage.
It’s also recommended to regularly inspect the machine for wear and tear, especially after extended use. Keeping the equipment clean and well-maintained will significantly extend its lifespan and ensure consistent performance over time.
(Word count: 512)d ribose supplement,ribose supplement,S-Adenosyl-L-methionine disulfate tosylate,S-Adenosyl-L-methionine
Jiangxi Chengzhi Bioengineering Co., Ltd , https://www.chengzhi-bio.com