Corn thresher installation "five" note
1. Make sure the equipment is placed on a flat and stable surface, at least four feet away from walls or other objects to ensure proper ventilation and reduce vibrations. A solid base will help prevent unnecessary shaking during operation, which can affect performance and safety.
2. When using the motor as the power source, always check that the power cord is securely connected, properly insulated, and that the grounding wire is firmly in place. This is essential for both the safe operation of the machine and the protection of the user from electrical hazards.
3. Feed the corn cobs into the machine continuously and evenly, maintaining an appropriate feeding rate. Inconsistent feeding can lead to reduced efficiency, while overfeeding may cause blockages, overload the system, and potentially damage the motor or other internal components. Always monitor the feeding process closely.
4. The moisture content of the shelled corn cobs should not exceed 20%. If the moisture level is too high, it may interfere with the threshing process, leading to poor separation of kernels and reduced output quality. It's recommended to dry the corn cobs before processing if necessary.
5. Before shutting down the machine, make sure all the input corn cobs have been fully processed and discharged from the system. Never stop the machine while it is under load, as this can cause mechanical stress and potential damage. Turn off the air supply first, then shut down the power once everything has been cleared out.
By following these guidelines, you can ensure the smooth and efficient operation of the equipment, extend its lifespan, and maintain a safe working environment. Always refer to the manufacturer’s manual for additional instructions and safety precautions.
ood Grade Supplement Same Medication,Food Grade Supplement Sam Supplement,Medication Sam E
Jiangxi Chengzhi Bioengineering Co., Ltd , https://www.chengzhi-bio.com