Silky Facial Mask And 3D Lifting Facial Masks 24K Gold Collagen Masks, Disposable Medical Supplies,Surgical Supplies,Skin Beauty Equipment YERY , http://www.nbfacialmasks.com
Wild boar breeding cage design
1. The site selection should be based on sites that are slightly elevated or easy to drain, dry and ventilated, face south to the south, have a hard soil, and have convenient transportation, and are located far away from the slaughterhouse and livestock trading market. The shed asks for support between the LimWo room and the outer chamber, and the production area is isolated from the living area. 2. Li Wo Room Design The nest room is for wild boar sleeping, laying, and eating places. The space is about 3.5 meters long and 3.3 meters wide. The height of the shed is about 2.5 meters. The shed is covered with oil felt and covered with straw (or Straw) 12 cm. For example, the roof of the shed is raised, so that the shed is not hot in summer. In the establishment of the circle, if the south-facing land is insufficient or not equipped with a built-in circle, it is also possible to build a row of pig sty in the north, but the stadium is required to extend 1-2 meters later so that the “wild boar†can dry in the winter every day. On the sun for a few hours; at the same time, the evening will be thicker plastic film (hood) to attack the north wind. Feeding “wild boar†in the cold north, and investing less for local materials, a warm circle can be built in the shape of a yurt for winter piglets to prevent cold. The construction method is: First, use 16-20 sapling heads of 1 meter or so, and insert it into the ground around a circle with a diameter of 1 meter to form a column pile, and weave the string tightly around the tree stump with rice straw bundles or wheat straw bundles. The top is braided and then the clay paste is placed on the straw bundle. On the south side of the warm circle, leave a 30-cm wide and 34-cm-high door that allows the piglets to come in and out freely. This hole must be close to the special hole in the nest room, the size of the warm nest hole size, so that the piglets in the inner litter after entering the straw nest warm nest to sleep. The three sides of the warm circle are built with 1 meter high cement bricks as protective walls to prevent the sow arches from warming up. In this way, even in the cold winter, piglets grow quickly. Both the LimWo and the outer litter rooms should be painted with cement mortar to create a clear, high-low outer shape so that they can be washed and urinated with fresh water in summer. However, the ground must not be too smooth to prevent slippery foot injuries when wild boars are mated. Sow feeding trough: length and width 60 cm * 40 cm, height 8 cm, made of cement mortar. The side of the feeding tank facing the outer chamber should be swept to a 45-degree bevel so as to clean up the remaining food. Piglet grazing trough: a standard brick half-section wall of 36 cm in height, 143 cm in length, divided into 6 compartments, each with a space of 16 cm and a height of 36 cm directly above the ground and 70 cm from the ground, and leveled with cement mortar . In this way, piglets are not eaten by the sow when the piglet feeds it for 8-10 days. 3. Outer nest design The outer nest is actually a playground for wild boar drinking, sports, and sun exposure. The outer chamber is 4 meters long and 3.3 meters wide. The three sides are made of cement bricks to form a 1.2-meter-high wall and a 80-cm wide door opening is installed. The Yuangang gate with a diameter of 10 mm is installed. At the same time, it is required to build a drinking pool that is conducive to drainage, and wipe it with cement mortar. The pool is 1 meter long, 0.4 meters wide and 0.22 meters deep. The pool can't be built too narrow, otherwise it's very important that wild boars in the summer cool down in the pool and result in stillbirths of pregnant sows and economic losses. 4. The Timber Channel special boar boars are more agile to the boars. To facilitate breeding, a low wall of 1 meter high must be built 1.2 to 1.5 meters away from the outer chamber to form a passage. When breeding, the boar can enter the shed of any estrus sow successfully through the channel, complete the mating task, and then return to the original nest through the wall channel.